What's New

February 2017 Updates

iOS: Litchi for DJI Mavic/Phantom/Inspire

Version 1.15.6
- fixed rare issue with mavic pro battery not updating correctly
Version 1.15.5
- added new "relative to ground" mode to set waypoint altitudes in the batch waypoint editor
- panorama bug fix for Mavic Pro

Android: Litchi for DJI Mavic/Phantom/Inspire

Version 3.10.4
- when uploading a waypoint mission, a progress window will now be shown
Version 3.10.3
- follow me fix with Mavic Pro & P4 Pro
- panorama bug fix for Mavic Pro
- misc improvements and bug fixes

January 2017 Updates

iOS: Litchi for DJI Mavic/Phantom/Inspire

Version 1.15.4
- a visual effect will now be shown when the drone is taking a photo
- misc improvements and bug fixes
Version 1.15.3
- added support for Inspire 2
- misc improvements and bug fixes
Version 1.15.2
- fixed rare crash at startup on some devices
- some diagnostic errors/warnings can now be closed

Android: Litchi for DJI Mavic/Phantom/Inspire

Version 3.10.2
- added support for Inspire 2
- a visual effect will now be shown when the drone is taking a photo
- misc improvements and bug fixes

December 2016 Updates

iOS: Litchi for DJI Mavic/Phantom/Inspire

Version 1.15.1
- added "Active Collision Avoidance", "Landing Protection", "Precision Landing", "Frequency Band", "Lightbridge 2 Channel Switch" settings
- added "JPEG Quality", "Video Caption", "Front LEDs Auto Turn Off", "Auto AE Unlock", "AF Focus Assistant" and "Video Coding" settings
- fixed custom buttons C1/C2 conflict
Version 1.15.0
- added support for Phantom 4 Pro
- misc bug fixes

Android: Litchi for DJI Mavic/Phantom/Inspire

Version 3.10.1
- fixed crash in the settings with Phantom 4
Version 3.10.0
- added support for Phantom 4 Pro
- added new "relative to ground" mode to set waypoint altitudes in the batch waypoint editor
- added "Active Collision Avoidance", "Landing Protection", "Precision Landing", "Frequency Band" settings

November 2016 Updates

iOS: Litchi for DJI Mavic/Phantom/Inspire

Version 1.14.3
- pano mode bug fix
Version 1.14.2
- the "Center Autofocus" custom function can now be used in VR mode
- fixed issue where in some cases a video decoder encryption error would incorrectly be shown
- fixed issue where the battery would sometimes fail to connect
Version 1.14.0 - 1.14.1
- added support for Mavic Pro
- added "Ocusync Preview Quality" and "Ocusync Transmission Channel" general settings (Mavic Pro only)
- added support for Landing confirmation
- added "Full HD Stream" and "Portrait Mode" camera settings (Mavic Pro only)
- added "5D button" key bindings in general settings (Mavic Pro only)
- added new custom functions for "Digital Zoom In/Out", "AE Lock/Unlock" and "Toggle Portrait Mode"
- added "Peak Focus Threshold" general camera setting
- fixed issues with optical zoom

Android: Litchi for DJI Mavic/Phantom/Inspire

Version 3.9.2
- fixed bug where optical zoom with Z3 camera would not work
- fixed bug where the phone camera's orientation would sometimes be incorrect in VR mode
Version 3.9.1
- misc bug fixes
Version 3.9.0
- added support for Mavic Pro
- Pano mode revamp and optimizations
- added support for Landing confirmation
- added "Full HD Stream" and "Portrait Mode" camera settings (Mavic Pro only)
- added "5D button" bindings (Mavic Pro only)
- added new custom functions for "Digital Zoom In/Out", "AE Lock/Unlock" , "Center Autofocus" and "Toggle Portrait Mode"
- setting the metering/autofocus is now done with a tap on the video preview
- added support for optical zoom (C2 + left wheel)

October 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.13.1
- added "Capture Strategy" setting in Pano mode, switch between "Column by Column" and "Row by Row"
- added "Mode" setting in Pano mode, switch between "Aircraft Rotation" and "Gimbal Rotation" (Inspire 1/M100/M600/A3 only)
- added "Nadirs" setting in Pano mode, allows selecting the number of Nadirs Litchi will take
- added "Width" setting in Pano mode, which lets you shoot non spherical panoramas
- added "Top Row Angle" setting in Pano mode, allows you to set the top row's pitch angle from 0 to +30°
- added GEO restricted flight zones to the map
- added setting to enable/disable GEO system, when disabled the app will use the previous NoFlyZone system (not up to date)
- added more warning messages that will display when a problem is detected
Version 1.13.0
- Pano mode revamp and optimizations
- setting the exposure metering is now done with a tap on the video preview
- triggering autofocus is now done with a tap on the video preview, switch between autofocus and exposure metering functions using the button at the top left corner of the video preview (X5/Z3/Mavic only)
- added setting to show GPS coordinates
- added "Center AutoFocus" custom function to trigger AutoFocus at the center
- optical zoom can now be triggered using C2+left RC wheel
- optical zoom bug fix
- many UI improvements and bug fixes
Version 1.12.4
- fixed screen recording crash on iOS 9
Version 1.12.3
- fixed issue where sometimes video recording would restart mid-flight with auto record enabled
Version 1.12.2
- added optical zoom support (pinch to zoom on video preview) for Z3 and X5 zoom lens
- added autofocus support for Z3 camera
Version 1.12.1
- added lightbridge 2 setting to switch between LB/EXT video sources
- fixed korean translation issue
Version 1.12.0
- added Litchi Vue support (stream the video feed to a nearby iOS device running the Litchi Vue app)
- added initial support for z3 camera
- fixed issue with map zoom

Android: Litchi for DJI Phantom/Inspire

Version 3.8.0
- added batch edit tool in waypoint mode
- waypoint altitudes are now shown above each waypoint
- remaining sdcard space is now shown in the settings
- added terrain map type
- misc bug fixes

September 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.11.0
- added batch edit tool in waypoint mode
- waypoint missions now show distance info between waypoints
- remaining sdcard space is now shown in the settings
- added Use Amap Imagery general setting (for China maps)
- added terrain map type
- the app now uses new database servers for missions saved to the cloud, be sure to update the app to continue using Mission Hub's features

Android: Litchi for DJI Phantom/Inspire

Version 3.7.0
- the app now uses new database servers for missions saved to the cloud, be sure to update the app to continue using Mission Hub's features

August 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.10.2
- long press to autofocus will now also change the focus mode if not already on auto (X5 & X5R)
- fixed autofocus and spot metering in photo mode 4:3
- fixed issue with histogram in photo mode 4:3
- updated translations
Version 1.10.1
- added ability to move the gimbal using touch/drag on the video preview
- updated translations
- a broken SDcard icon will now be shown when there is a problem with the sdcard
- max number of missions increased from 100 to 1000
- fixed no sound when taking photos with the Interval capture mode
- in flight logs, the channel will now show correct values for Auto
- missions with empty names are no longer allowed

Android: Litchi for DJI Phantom/Inspire

Version 3.6.8
- long press to autofocus will now also change the focus mode if not already on auto (X5 & X5R)
Version 3.6.7
- added how to connect help at app startup
Version 3.6.6
- added battery info/settings panel, tap on battery icon to show it
- added video recording time
- replaced Gimbal FPV mode setting by Gimbal Mode setting
- max number of missions increased from 100 to 1000
- updated translations
- fixed autofocus and spot metering in photo mode 4:3
- fixed issue with histogram in photo mode 4:3

July 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.10.0
- added support for the following languages: German, Italian, French, Russian, Chinese Simplified, Chinese Traditional, Spanish, Japanese, Czech, Dutch, Danish, Greek, Hungarian, Korean, Indonesian, Portuguese (Brazil), Portuguese (Portugal), Polish, Vietnamese, Finnish, Swedish, Turkish, Romanian
- added language general setting
- added battery info/settings, tap on battery icon to show the settings
- added remaining flight time indicator
- added digital zoom for Phantom 4
- added Double Output (HDMI) general setting
- fixed bug where the username would show as (null) when logged in via Facebook

Android: Litchi for DJI Phantom/Inspire

Version 3.6.5
- updated translations
Version 3.6.4
- updated translations

June 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.9.2
- fixed issue where the top bar status would allow to cancel a Landing caused by reaching the critical battery level
Version 1.9.1
- added ability to set different speeds at each waypoint (only effective when the aircraft is in range of the RC)
- added vision positioning general setting
- when the aircraft is in Go Home/Landing modes, you can now tap on the top status bar to cancel the RTH/Landing
- added ability to set exposure spot using single tap on video preview, when using spot metering mode
- when starting the app, the last flight mode that was used will be selected
- added load/save to Orbit mode
- added long press bindings for C1/C2
- added custom functions 'Toggle VR Immersive' and 'Toggle VR Joystick'
- added ability to unlock map to have it rotate with the device heading
- misc bug fixes
Version 1.9.0
- added VR mode
- added FPV mode with auto takeoff/land, course lock and home lock functions
- added custom function to toggle the iphone camera in VR mode
- added "Show Home Orientation" general setting, when enabled shows a line between home point and aircraft on the map
- added gimbal work mode general setting
- added gimbal FOV indicator for inspire 1 series
- fixed focus mode with aircraft rotation off for Inspire 1 series
Version 1.8.0
- added voice feedback settings
- added compass calibration in settings
- added maximum altitude general setting
- misc improvements and bug fixes

Android: Litchi for DJI Phantom/Inspire

Version 3.6.3
- updated translations
Version 3.6.2
- added ability to set different speeds at each waypoint (only effective when the aircraft is in range of the RC)
- added vision positioning general setting
- when the aircraft is in Go Home/Landing modes, you can now tap on the top status bar to cancel the RTH/Landing
- added ability to set exposure spot using single tap on video preview, when using spot metering mode
- for X5 cameras, focus is now done with a long press
- fixed bug with insert waypoint feature changing the altitude for other waypoints
- removed "Minimum/Maximum selectable altitude" settings which now default to -200m (min) and 500m (max)
- fixed bug where a space at the end of the email would cause failed logins
Version 3.6.1
- misc bug fixes
Version 3.6.0
- added 'Aircraft Head Tracking' in VR mode to control the aircraft yaw with your head
- added home indicator in VR mode
- added recording indicator in VR mode
- added 'Show Home Orientation' general setting
- added 'Mobile Camera (VR)' custom function with which you can toggle your mobile device's camera in VR mode
- added 'Toggle VR Immersive' and 'Toggle VR Joystick' custom functions
- added 1080p 120 fps recording resolution for Phantom 4
- fixed inspire 1 yaw head tracking vr bug
Version 3.5.0
- added in-app exposure settings (tap on exposure info panel at the top of the video preview to show the settings)
- added voice instructions for compass calibration
- minor tracking improvements for P3S when the camera is in photo mode and for the Nvidia Shield tablet in both camera modes
- misc improvements and bug fixes

May 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.7.0
- added ability to start one month free trial for HealthyDrones.com's HD 360 Gold subscription (exclusive to Litchi), refer to https://flylitchi.com/healthydrones for more info
- improvements to automatic gimbal control in waypoint mode
- added object avoidance info (distance in meters) and sounds for Phantom 4
- added RC Signal Lost general aircraft setting (only affects manual flying)
- added Gimbal Pitch Extension general aircraft setting
- added front LEDs general setting (also added as custom function for C1/C2)
- added collision avoidance general setting for Phantom 4
- in Focus and Track modes for Inspire type aircrafts, the gimbal yaw will no longer be controlled when aircraft rotation is set to auto

Android: Litchi for DJI Phantom/Inspire

Version 3.4.0
- added ability to start one month free trial for HealthyDrones.com's HD 360 Gold subscription (exclusive to Litchi), refer to https://flylitchi.com/healthydrones for more info
- improvements to automatic gimbal control in waypoint mode
- added object avoidance info (distance in meters) and sounds for Phantom 4
- added RC Signal Lost general aircraft setting (only affects manual flying)
- added Gimbal Pitch Extension general aircraft setting
- added front LEDs general setting (also added as custom function for C1/C2)
- added collision avoidance general setting for Phantom 4
- in Focus and Track modes for Inspire type aircrafts, the gimbal yaw will no longer be controlled when aircraft rotation is set to auto

April 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.6.0
- you can now activate Follow in Track mode. When using Track's Follow feature always be ready to use the RC switch to regain control
- smoother joystick controls in Track and Focus mode
- added histogram in camera settings
- screen recorder should be more reliable
- gimbal roll can now be adjusted using C2 + right wheel
Version 1.5.0
- added support for Phantom 4
- added new Track mode which uses computer vision to track a selected object
- added new Focus mode which uses GPS to focus on a subject
- added all camera settings and exposure details panel
- added support for Auto-Focus on tap (X5 and X5R only)
- the C1 RC button setting is now enabled again
- fixed hardware decoding setting not always applying correctly
- fixed issue with waypoint mode finish action "Back to 1"

Android: Litchi for DJI Phantom/Inspire

Version 3.3.1
- fixed rare crash at startup on galaxy s6 devices
Version 3.3.0
- added new Track mode which uses computer vision to track a selected object. When using Track's Follow feature always be ready to use the RC switch to regain control
- Focus mode is now included in the base app, the base price has been adjusted accordingly
- smoother joystick controls in Track and Focus mode
- added histogram in general camera settings
- added Focus on long press for X5 and X5R cameras
- added Hue camera setting
- misc bug fixes
Version 3.2.1
- hotfixed pano mode with gimbal rotations for Inspire 1
Version 3.2.0
- added support for Phantom 4 (autonomous flights require P mode, switch to S or A to regain control)
- improvements to Focus mode so movements should be less affected by wind
- added AEB capture mode settings
- panoramas taken in Pano mode with a P3/P4 should be more stable and less affected by wind
- fixed bug where exposure info wasn't correctly updated in manual mode

March 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.4.0
- added panorama mode
- added grid lines camera setting

Android: Litchi for DJI Phantom/Inspire

Version 3.1.0
- improvements to panorama mode to make it more reliable

February 2016 Updates

iOS: Litchi for DJI Phantom/Inspire

Version 1.3.1
- fix iPad Pro crash
Version 1.3.0
- added Orbit flight mode
- misc improvements and bug fixes

Android: Litchi for DJI Phantom/Inspire

Version 3.0.4
- improved POI transitions in Focus POI waypoint missions
- fixed downlink signal bars not showing for some users
- misc bug fixes
Version 3.0.3
- fixed crash on some devices
Version 3.0.2
- fixed compass error not removing itself after successful calibration
- fixed a bug where in some cases no errors would be shown if the app failed to register with the DJI servers
- fixed a bug where the P3 standard signal quality would not be stable
- fixed wrong no fly zone warnings
Version 3.0.1
- added support for P3 Standard, P3 4K, Inspire 1 Pro/Raw
- removed P2 vision and P2 vision + support
- added aircraft model auto detection
- added new camera shooting modes (HDR and AEB)
- added new mission finish action Reverse
- added ability to change the cruising speed while a mission is in progress
- removed aircraft type and video decoder settings
- misc improvements and bug fixes

Important: Litchi 3.0.1 is not compatible with the Phantom 2 Vision series due to DJI dropping support for it in the development kit.
If you are a Phantom 2 pilot and wish to continue using Litchi, you should either disable automatic updates for Litchi or download a separate app that we made specifically for Phantom 2 users. To ease the transition, the app can be downloaded for free at https://goo.gl/5BNEqW